PRODUCT DESCRIPTION :
- The remote control monitor of the Gold Kit will be supplied with our height sensor kit. This kit allows the system to be adjusted in a more sophisticated way thanks to IC programs which is not the same as other normal air suspension to adjust the ride height by air pressure. This system will measure, record the ride height desired accurately and depending on your setup will you to adjust the ride height while driving, which will eliminate uneven tyre wear, bottoming out, or chassis damage resulting from the different weights, temperatures, or any other unpredictable factors. It is a reliable digital ride height control system. Due to the easy installation, the height sensor kit just needs to bolt on the vehicle, the linkage kit should be attached on the lower control arms and then install the wire kit to complete the installation.
- This is a complete kit with excellent dampening setting to match up the properties of pneumatic springs in order to increase the vehicle’s stability, unlike other brands come with non adjustable shock absorbers which cause the vehicle to be bouncy and unstable during cornering. Besides, modifying upper mounts, cutting car body or welding the OEM shock to the vehicle are not required when installing our products.
- Not only is this system allowed to change air pressure, but you can also adjust the maximum and minimum ride height freely to match up a body kit to get the desired ride height, which is one of our products features that other brands do not have.
- This product includes a full set of shock absorbers. It is also an option to replace air bags with 4 x coil springs to make a full set of shock absorbers once an air management system is not fitted. (PS. The high performance shock absorbers supplied with this kit are dampening and ride height adjustable).
- This system is designed for easy bolt-on so it is not required to work with the O.E.M shock absorbers.
- This system is 36-level dampening adjustable, ride height adjustable, and includes upper mounts in the fronts and rears. The McPherson strut comes with pillow ball top mounts which have ability to adjust the camber degree.
- This system comes with a high-pressure, mute and rotational speed compressor from AZ. The speed of pumping the airbag is the fastest in the world. It takes only 3.5 minutes for 2 compressors to pump a 20L tank 0~200psi. Unlike other brands who’s plates make a loud noise, each compressor comes with 4 snubbers and high-tech silencers to decrease noise suppression.
- Also, a tyre pressure gauge can be connected to the air tank to fill your tires; the air pressure in the tank is sufficient for the tire pressure gauge.
- A pneumatic tool can be connected to the air tank as well to clean the exterior of your vehicle, the air pressure in the air tank is sufficient for the pneumatic tool.
- You can adjust the ride height with ease whilst in the car. The ride height can be adjusted all the time to reach your desired height depending on the load of your vehicle.
- A pressure gauge supplied with this kit shows the vehicle ride height. Adjusting the vehicle ride height is allowed when the vehicle is in motion.
- The adjustment range of ride height is between 0 – 120/200mm. (based on different applications).
- The speed of lowering and raising vehicle ride height is 2-5 seconds only.
- This kit comes with 4 x solenoid valves and 1 x remote control which allow you to adjust the ride height while in or out of the car.
- OLED wireless memory remote control can display the air tank and front/rear pressure value. It will automatically modify the value while driving.
- There is no complex wire setting; Fast installation within 2 hours.
- This kit comes with two remote controls, one is with LED and full function and the other is with simple version.
- The additional function for this system is to display, show-off or hookup.
- The high performance shock absorbers supplied with this kit have 36 levels of adjustable dampening, and the dampening is set up specifically for better sport handling.
- Available for 4 ride height memories.
- No need to install pressure gauge and switch and can protect the car interior design.
- Warning signal for deficient tank pressure on remote control.
- Memory for engine start and automatically alter ride height on remote control.
- All parts are collected in the monitor box (as attached) so you won’t see messy wires and parts.
- One touch function. Simply by one press, you can adjust to your ride height. (In previous version, you need to press the buttons for a long time and will cause bad connection.)
- Power save device (sleeping mode).
- Battery change unnecessary (charged by USB).
- Function setting for speeding and exhausting
- Lovely design, lightweight volume, tank, remote control monitor and integral motor.
THIS SYSTEM INCLUDES :
– 20L STAINLESS AIR TANK× 1
– HIGH SPEED COMPRESSOR × 1
– MOTOR VIBRATION-FREE MOUNTING HARDWARE × 4
– HIGH-TECH SILENCERS PLATE BASE × 1
– AIR HOSE × 1
– 25M 4X6MM NYLON × 1
– 1M 7.5X10MM NYLON LINE× 1
– 7M POWER CORD × 1
– 60A FUSE × 1 , FUSE BOX × 1
– AFH REMOTE CONTROL ×1 , SIMPLE REMOTE CONTROL×1
– PRESSURE SENSOR x 1
– SHOCK ABSORBERS WITH 36 LEVELS OF ADJUSTABLE DAMPING × 4
– HEIGHT SENSOR KIT x 4
– GOLD ECM ASSEMBLY x 1